Motion Detection Setup - Samsung SVR-1630 User Manual

SVR-1630

5.4.2 Motion Detection Setup

This menu is to set the MD of each channel. All channels (Cam 1~Cam 16) are set to the same
conditions and can be set up separately.
Motion Detection
Sets seven MD sensitivities; Off, Lowest, Low, Standard, High, Highest
MD Area
Sets the MD Area. You can set 64 (8(H) X 8(W)) areas.
The default value is "Select All". Press the "Custom Area" button, and the MD Area setup window is
opened.
Include Video Loss
This menu is to set whether, when no video signal is detected, it should be taken as MD. It can be set to
Yes or No.
<Note>
Press the "Apply" button for all channel setup. If this is not done, the setting is not applied.
40
오류! 스타일이 정의되어 있지 않습니다.
2004.07.2001 (v 1.0)
Samsung Techwin CO.,Ltd.