Final Fitting; Customer Care - Rangemaster Professional+ FXP 90 Dual Fuel User's Manual & Installation Instructions

Check the appliance is electrically safe and gas sound when you have finished.
Fig. 7.15
ArtNo.281-0026 - Front plinth
Fig. 7.16
Make sure the inner
rail is forwards
Fig. 7.17
INSTALLATION

Final Fitting

Fitting the Plinth
Remove the 3 screws for the plinth mounts along the front
bottom edge of the range (Fig. 7.15). Fasten the plinth using
these screws (alternative colour screws can be found in the
loose parts pack).
Refitting the Drawer
To refit the drawer in the cooker, pull the side rails fully out
(Fig. 7.16). Make sure the inner race is forwards.
Carefully move the drawer back between the rails and rest it
on the side rails (Fig. 7.17).
Push the drawer back until the clips click into place.
Refitting the Oven Door
To refit the door, slide the hinges back into their slots. Rotate
the locking 'U' clips back to fit onto the hinges.

Customer Care

Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
28
Thank you.