Safety Instructions - Hilti TE 1000-AVR Original Operating Instructions

Power tool
Weight in accordance with EPTA
procedure 01/2003
Dimensions (L x W x H)
Single impact energy in accordance
with EPTA procedure 05/2009
Chuck
en
Hammering frequency under load
Information about the power tool and its applications
Protection class
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑1):
Typical A-weighted sound power level, TE 1000-AVR
Typical A-weighted emission sound pressure level, TE
1000-AVR
Typical A-weighted sound power level, TE 1500-AVR
Typical A-weighted emission sound pressure level, TE
1500-AVR
Uncertainty for the sound levels given for the
TE 1000‑AVR / TE 1500‑AVR
Triaxial vibration value for the TE 1000‑AVR (vibration
vector sum)
Chiseling, a
h, Cheq
Triaxial vibration value for the TE 1500‑AVR (vibration
vector sum)
Chiseling, a
h, Cheq
Uncertainty (K)

5 Safety instructions

5.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
20
TE 1000‑AVR
11.8 kg
700 mm x 138 mm x 230 mm
22 J
TE‑S
32.5 Hz
Protection class II (double insulated)
98 dB (A)
87 dB (A)
100 dB (A)
89 dB (A)
3 dB (A)
Measured in accordance with EN 60745‑2‑6
6.5 m/s²
Measured in accordance with EN 60745‑2‑6
12 m/s²
1.5 m/s²
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
TE 1500‑AVR
14.2 kg
760 mm x 138 mm x 230 mm
30 J
TE‑S
27 Hz