Table of Contents
Advertisement
USING THE TIMER
the current time of the day (18:30), the word "auto" and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the
pressing the
button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the
button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8.
sign is shown.
9. If you wish to restart the oven press the
starts working manually.
NOTE: If your press the
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Changing the cooking time after programming.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the " " or
"-" keys to set the new cooking time..
button and the cooking time by
button.
The display to be shown when the
cooking finishes
button during semi automatic and full
button and using the ( ) and ( )
Caution: Any cleaning agent used
incorrectly may damage the appli-
ance.
Always let the appliance cool before
cleaning.
Do not use a steam cleaner on this
is
appliance.
Some cooking operations generate con-
siderable amount of grease, this com-
bined with spillage can become a hazard
if allowed to accumulate on the appli-
ance through lack of cleaning. In
extreme cases this may amount to mis-
use of the appliance and could invalidate
your guarantee. Do not use caustic,
corrosive or abrasive cleaning products,
products containing bleach, coarse wire
wool or any hard implements, as they
will damage the surfaces.
Do not use harsh abrasives or sharp
metal scrapers to clean the oven
door glass since they can scratch
the surafce which may result in
shattering of the glass.
All parts of the appliance can be safely
cleaned with a cloth wrung out in hot
soapy water.
button. The oven
Vitreous enamel parts
grill pan, oven compartment
Use a mild cream cleaner - eg; "Cif".
Look for one which has the Vitreous
Enamel Development Council's
ommendation seal. Stubborn marks may
be removed with a moistened "Brillo"
pad. The grill pan may be cleaned in a
dishwasher, or with a nylon brush in hot
soapy water.
Glass parts
door panels
Use a mild cream cleaner - eg; "Cif".
Rinse thoroughly and dry with a soft
cloth.
16
CARE & CLEANING
rec-
Hide quick links:
Advertisement
Table of Contents
