Safety Barrier Installation Instructions - Vermont Castings KHLDV400PTSCSB Installation And Operating Instructions Manual

KHLDV Series Gas Fireplace
S
AFETY
SAFETY BARRIER INSTALLATION
INSTRUCTIONS
NOTE: A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and shall be installed for the protection of
children and other at risk individuals. If the barrier
becomes damaged, the barrier shall be replaced with
the manufacturer's barrier for this appliance.* Any
safety screen, guard, or barrier removed for servicing
the appliance must be replaced prior to operating the
appliance.
* See parts list for model number.
1. Remove screen from packaging.
2. Align the four slots on the sides of the screen frame
(two top, two bottom) Figure 63 with the correspond-
ing shoulder bolts on the fi rebox Figure 64.
3. Slide the screen down onto the shoulder bolts until it
fi ts securely in place.
NOTICE: It is the responsibility of the installer to ensure
the barrier is affi xed to the fi replace at the time of instal-
lation.
Tabs
(two per side)
Figure 63
52
CERTIFIED
B
ARRIER
DANGER
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall
be installed for the protection of children and
other at risk individuals.
WARNING: The safety screen barrier
must be installed after the glass front is
in place. It is NOT a replacement for the
glass and the unit must NOT be oper-
ated without the glass in place.
Slots (Qty: 4.
Two per side)
Figure 64
FINAL INSTALLATION
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Slot
20306742
20306543