Troubleshooting Guide - York Fitness T275 Instruction Manual

MONITOR POWER SUPPLY
The training computer does not require any battery since it is supplied with power via the
running treadmill.
TROUBLE SHOOTING
WHEN TO CALL FOR HELP
This treadmill is designed with user safety as the number one priority. In the event of an electrical
failure, the treadmill will shut off automatically to prevent user injury and to prevent damage to
expensive components such as the motor.
When you encounter unusual behaviour from the treadmill, simply turn the power switch off and on
to reset the treadmill.
This should clear incidental errors and prepare the treadmill for normal operation again.
If, after you have reset the treadmill by turning the power switch off and on again, the treadmill is
still not operational, then it is time to call your dealer for advice.
Error 1: ( E1 ) Communication Error
When the connection cables are not installed correctly, the monitor will display "E1" on
display screen.
Please examine whether all connection cables are well connected and then reset the
treadmill again.
If the treadmill returns to normal operation, you may continue to use the treadmill.
If the treadmill does not return to normal operation, then call the dealer for advice.
Error 2: ( E2 ) Motor Connection Error
Call your dealer for advice.
Error 3: ( E3 ) Speed Sensor Error
Call your dealer for advice.
Error 4: ( E4 ) Relay Error
Call your dealer for advice.
Problem
Treadmill will not start
Running mat slips
Running mat hesitates
when stepped on
Running mat is off center
* SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
YORK T275 TM / 21
TROUBLE SHOOTING GUIDE
Potential Cause
1. Not plugged in
2. Safety key not inserted
3. House circuit breaker tripped
4. Treadmill circuit breaker tripped
5. On/Off switch on "OFF"
1. Running mat not tight enough
2. Drive belt not tight enough
1. Insufficient lubrication
2. Running mat too tight / too loose
Running mat tension uneven
across the rear roller
Corrections
1. Plug into grounded outlet.
2. Insert the safety key into the console.
3. Reset or replace fuse.
4. Reset the circuit breaker.
If happens again, lubricate the deck to
reduce friction between mat and deck.
5. Turn On/Off switch to "ON".
1. Adjust running mat tension.
2. Adjust drive belt tension.
1. Apply silicone lubricant.
2. Adjust running mat tension.
Center the running mat.
*