troubleshooting
!
If you have a problem with your treadmill, before you do anything else please check that all the cables have
been connected correctly. Loose cables are very common and many problems can be solved by making
guide please call your local York distributor for advice.
Malfunctions and Errors
The console will display information regarding operational faults
with the treadmill. If your treadmill behaves in an unusual way and
and then back on again. This should clear the treadmill of incidental
errors and prepare it for normal operation. If there is still a problem
•
E1 - Communication error
•
E2 – Motor connection error
•
E3 - Speed sensor error
•
E4 – Relay error
•
E5 – Over electrical current error
•
E6 – Running mat over speed error
•
E9 - Safety key error
back on again. If this doesn't work, call your local York distributor for
advice.
16
sure the cables are properly connected
In the event of an electrical failure the treadmill will automatically
1. Unplug the power cable from the treadmill
2. Push in the safety switch
3. Re-plug the power cable into the treadmill