LifeSpan ROWER-440 Owner's Manual page 7

STEP 3:
1. Tighten the stand rail (29) to the protective guard (28) with screw (27), and then tighten
the protective guard (28) to the slide way (22) with hexagon bolt (25), knob (2), flat
washer (8), and nylon nut (9).
STEP 4:
1. Connect the connection wire (46) to the sensor wire (36), then tighten the slide way (22)
to the mainframe (1) with hexagon bolt (14), knob (2), knob (15), flat washer (35), flat
washer (8), nylon nut (9) and put the plastic cap (70) at last.
2. Tighten the pedal (11) to the mainframe (1) with bolt (12), flat washer (10). When folding
it, take off the knob (15) and fold the slide way (22).
7
ROWER-440