Table of Contents
Advertisement
GETTING STARTED
Chapter 3 – Getting Started
SIM Cards
Before you can begin to use the modem, you need to set up a wireless account with your carrier. Follow these
1.
Contact your wireless provider/partner/reseller to obtain an account and a SIM card for their network.
This device requires a mini SIM (2FF).
2.
Provide your activation agent with the following:
a.
The modem's unique 15-character IMEI number located on the device label.
b.
The modem model number, also located on the device label. This number allows the carrier to verify
that the modem is approved for operation on their network.
Important:
product label has a section titled Carrier Activation Information, provide the approved radio listed on the
label. If not, provide the model number (not the ordering part number) listed on the label.
3.
Follow your provider's instructions for activating their SIM card on their network.
Installing a SIM Card
To install a SIM Card:
Warning:
If the device is connected to a computer or power supply, disconnect it. Inserting or removing a SIM
card with the device powered may harm the SIM card and the device.
1.
Remove the SIM cover from the back of the device. If you have trouble sliding the SIM cover, use a flat-
blade screwdriver in the slot on the SIM cover to slide it out.
2.
Insert the SIM card into the card holder with the gold contact side facing down as shown.
3.
Verify that the SIM card fits into the holder properly and replace the cover.
12
Check your product's label for the correct information to provide your wireless carrier. If your
®
QuickCarrier
USB-D MTD-MNA1 User Guide
Advertisement
Table of Contents
