Time Settings - Logik L22FED13 Instruction Manual

Time Settings

Allows you to adjust power on / off time, sleep timer, auto standby and time zone.
1. Press the MENU button and then press the
TIME menu and then press the OK button.
2. Press the
press the OK button.
GB
3. Press the
setting.
Clock
Off Time
On Time
Sleep Timer
Auto Standby
(4 hours)
32
L22_24FED13_IB_RC131024_Annie.indd 32
buttons to select the following time options and then
buttons to select the options. Press the OK button and then press the
The clock is set automatically when receiving a digital signal.
Allows you to set the off time that will automatically switch off the TV. Cycle through and
select from the following off time options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. /
Sat.~Sun. / Sunday.
Allows you to set the on time that the TV will automatically switch on the TV and tune to the
source, channel and volume you select. Cycle through and select from the following on time
options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. / Sunday.
Ensure your SCART device is turned off before entering the On Time menu. If your
SCART device is turned on, the On Time menu will default to the SCART device.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
The clock will be set automatically when receiving a digital signal. Time must be set before
using Sleep Timer function.
Press the buttons to select a period of time after which the TV automatically switches to
standby mode: OFF / 10 / 20 / ... / 180 / 240 min. The timer begins to count down from the
number of minutes selected.
If you turn the TV off after setting the sleep timer, the sleep timer setting
will be erased.
Alternative
1. You may press the SLEEP button repeatedly to select the number of
minutes: OFF / 10 / 20 / ... / 180 / 240 min directly.
2. To cancel the sleep time, press the SLEEP button repeatedly until Off
appears.
The unit will automatically switch to standby mode
4 hours after the last time the remote control was
used. A reminder screen will pop up and count
down before the unit switches to standby mode.
To turn off the auto standby function, press the
MENU button to display the main menu. Press the
buttons to select the Time option and then press
the OK button. Press the
OK button to select "Off". Press the EXIT button to exit the main menu. To save energy you
should always turn the auto standby function back to "ON".
buttons to select the
buttons to select the Auto Standby option and then press the
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Clock 10 Mar 2013 15:01
Off Time Off
On Time Off
Sleep Timer Off
TIME
Auto Standby (4 hours) On
Time Zone London GMT
buttons to adjust each option's
The unit will automatically switch to standby
mode in 5 minutes.
Press the OK button to continue viewing.
OK
24/10/13 5:38 PM