Connecting A Coaxial Audio Receiver; Connecting Headphones - Logik L22FED13 Instruction Manual

Connecting a Coaxial Audio Receiver

For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable (not included) to connect the
TV's SPDIF OUT output socket to an external audio
receiver's audio coaxial input socket.
2. Plug the connected devices into the mains socket
before switching on the TV.
3. Press the
TV or on the remote control to turn on your TV.
4. Press the
TV or the INPUT button on the remote control
to display the Source List. Use the
on the remote control to select any desired input
source and then press the OK button to confirm.
GB
The TV's volume will not be affected. You may
control the audio level via the Audio Receiver.

Connecting Headphones

Connect your headphones to the TV's HEADPHONE
socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly
increase the volume until you reach a comfortable
listening level.
Long-term exposure to loud music may
cause hearing damage. It is best to avoid
extreme volume when using headphones,
especially for extended periods.
18
L22_24FED13_IB_RC131024_Annie.indd 18
button on the right side panel of the
button on the right side panel of the
buttons
Rear Right Bottom View of TV
Y Pb Pr
VIDEO L R
Rear Right Side View of TV
COMMON INTERFACE (CI)
USB HDMI2 HDMI1
HEADPHONE
Earphones Cable
(not included)
SCART
SPDIF OUT
Audio Cable
(not included)
Audio Receiver
PC IN RF
PC AUDIO
24/10/13 5:38 PM