Picture Setting - Logik L22FED13 Instruction Manual

8. When the download is complete, the TV will automatically upgrade the
software.
9. When the update is complete, the TV will return to standby mode.
10. Press the
to switch on the TV.
If you experience difficulties after the software update, we recommend
that you restore your TV to the factory default settings. To do this, follow
the steps below:
1. Press the MENU button to go to the MAIN menu. Press the
2. Press the
3. The TV will restore all settings and go to the First Time Installation. Follow
GB

Picture Setting

Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
PICTURE menu and then press the OK button.
2. Press the
press the OK button.
3. Press the
setting.
Picture Mode
28
L22_24FED13_IB_RC131024_Annie.indd 28
button on the right side panel of the TV or on the remote control
to select OPTION and then press the OK button.
buttons to select Restore Factory Default and then press
the OK button. Press the button to select Yes to reset the setting.
the First Time Installation steps (refer to page 19-21 for details).
buttons to select the following picture options and then
buttons to select the options. Press the OK button and then press the
Select among picture mode: Standard / Mild / User / Dynamic.
Alternative
You may press the P.MODE button to select the picture mode directly.
Contrast
Adjusts the difference between light and dark levels
in the picture (for User mode).
Brightness Increases or decreases the amount of white in the
picture (for User mode).
Colour
Controls the colour intensity (for User mode).
Sharpness
Adjusts the level of crispness in the edges between
light and dark areas of the picture (for User mode).
Tint (For NTSC Adjusts the balance between red and green levels
format) (Tint is only available for NTSC signal reception).
buttons
buttons to select the
Software Update(OAD)
71%
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Picture Mode Standard
Colour Temperature Medium
Aspect Ratio Auto
Noise Reduction Middle
PICTURE
Screen
Backlight 6
buttons to adjust each option's
Picture Mode Standard
Contrast 50
Brightness 50
Colour 50
Sharpness 50
Tint 50
BACK EXIT MENU
24/10/13 5:38 PM