Formulating Functions; Function Commands - Aastra 610d User Manual

Personalizing Your Phone

Formulating Functions

This section explains how you can activate an individual function, e.g. call forwarding, using the

function commands.

■ Function Commands
You can use function commands to define a function to suit your personal requirements. A
function can consist of one or more function commands, function codes, and the phone
number.
Tab. 1 The following function commands are available:
"I"
"X"
"P"
"N"
"."
"Z"
"R"
"Y"
Tab. 2 Examples of how to define a function:
"IR"
"I201"
"I*21201X"
■ */# Procedures
A list with all */# procedures can be found at
# Procedures").
64
Seize line
Disconnect
Pause 1 second before the next operation
Use the phone number entered in call preparation
Control key function (up-circuit system)
Activate/deactivate DTMF mode
Use the phone number last dialled
Disconnect and reseize the line.
Seize line ("I"),
dial phone number last dialled ("R")
Seize line ("I") and dial phone number 201
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
Notes:
• Text mode has to be activated before you can enter function commands.
• Functions that are not available via the menu can be activated using the */#
procedures (see "User's Guide */# Procedures").
• You can either type in a */# procedure directly or store it under a key.
• You can only activate certain */# procedures if the same function cannot be
obtained via the menu.
• The availability of certain */# procedures may be restricted depending on the
system and software version.
http://www.aastra.com/docfinder ("User's Guide */
Aastra 610d