On Screen Display; Privacy Zone - Foscam FI9853EP User Manual

www.foscam.com
Resolution: The camera supports two types: 720P, VGA. The higher the resolution is, the clearer video will
become. But the code flux will become larger too, and it will take up more bandwidth.
Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate
is large, that will lead to video can not play well.
Frame Rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the
maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should
lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve
fluently video.
Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more
likely you will get a better video quality, but at the cost of higher network bandwidth consumption.
Variable bitrate: Select the Bit rate type to constant or variable.

4.4.2 On Screen Display

This page is used to add timestamp and device name on the video.
Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the
video,
Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name on
the video.

4.4.3 Privacy Zone

This page is used to add privacy zone on the video.
Shenzhen Foscam Intelligent Technology Co., Limited
44
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168