Connections And Control Devices - ESAB Warrior 400i CC/CV Instruction Manual

GB
5.1

Connections and control devices

1 Mains power supply switch, O/I
2 Indicator lamp, yellow, overheating
3 Indicator lamp, green, VRD function
(reduced open-circuit voltage)
4 Display, current (A) and voltage (V)
5 Knob for setting:
MMA/TIG/Arc air gauging: Current (A)
Mobile Feed mode: Voltage (V)
6 Knob for choice of electrode type
7 Knob for inductance (MIG/MAG) and arc
force (MMA)
bu21e
8 Knob for welding method
9 Connection (-): MIG/MAG: Return cable
TIG: Welding torch
MMA: Return cable or welding cable
10 Connection (+): MIG/MAG: Welding cable
TIG: Return cable
MMA: Welding cable or return cable
11 Circuit breaker, 10 A, 42 V
12 Connection of wire feed unit
13 Connection of remote control unit (option)
14 Connection of mains power supply
- 43 -
© ESAB AB 2012