6.2.5
Step 5: Install MegaRAID SCSI 320-1
6-12
Select a 3.3 V or 5 V PCI slot and align the MegaRAID SCSI 320-1
controller bus connector with the slot.
between the 3.3 V and 5 V slots.
Figure 6.6
3.3 V and 5 V PCI Slots
Insert the MegaRAID SCSI 320-1 card in the PCI slot, as shown in
Figure
6.7. Press down gently but firmly to make sure that the card is
properly seated in the slot. The bottom edge of the controller card should
be flush with the slot. Attach the bracket to the computer frame with the
bracket screw.
Hardware Installation
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Figure 6.6
shows the differences