Scsi Connectors - LSI MegaRAID SCSI 320-1 RAID Controller Series 520 Hardware Manual

Raid controller
Table of Contents

Advertisement

Chapter 1
Overview
This chapter provides an overview of the MegaRAID
basic SCSI features. It contains the following sections:
·
Section 1.1, "Features"
·
Section 1.2, "SCSI Channel"
·
Section 1.3, "NVRAM and Flash ROM"
·
Section 1.4, "SCSI Connectors"
·
Section 1.5, "Single-Ended and Differential SCSI Buses"
·
Section 1.6, "Maximum Cable Length for SCSI Standards"
·
Section 1.7, "SCSI Bus Widths and Maximum Throughput"
·
Section 1.8, "Documentation"
RAID controller is a high-performance, intelligent PCI-to-SCSI host
adapter with RAID control capabilities. The MegaRAID SCSI 320-1
provides reliability, high performance, and fault-tolerant disk subsystem
management.
The MegaRAID SCSI 320-1 is part of the LSI Logic Intel GC80302-based
MegaRAID controller family. The MegaRAID SCSI 320-1 is an entry
level- to mid-range RAID controller solution. MegaRAID SCSI 320-1
offers a cost-effective way to implement RAID in a server.
The MegaRAID SCSI 320-1 has an Ultra320 and Wide SCSI channel
supporting data transfer rates up to 320 Mbytes/s per channel. The SCSI
channel supports up to fifteen non-Ultra SCSI devices. The MegaRAID
SCSI 320-1 includes MegaRAID features and performance.
MegaRAID SCSI 320-1 Hardware Guide
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
®
SCSI 320-1 and
1-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Megaraid scsi 320-1

Table of Contents