Converting Internal Wide To Internal Non-Wide; Converting From Internal Wide To Internal Non-Wide - LSI MegaRAID SCSI 320-1 RAID Controller Series 520 Hardware Manual

Raid controller
Table of Contents

Advertisement

A.1.4
Converting Internal Wide to Internal Non-Wide (Type 30)
A.1.5
Converting from Internal Wide to Internal Non-Wide (Type 3)
The cable assembly for converting internal Wide SCSI connectors to
internal non-Wide (Type 30) SCSI connectors is shown below.
Pin 1
A
Pin 1
B
The cable assembly for converting internal Wide SCSI connectors to
internal non-Wide (Type 3) SCSI connectors is shown below.
Pin 1
A
Pin 1
B
68-Pin High-Density SCSI Internal Connector
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Connector A: 68 Position Plug
(Male)
AMP– 749925-5
Connector B: 50 Position Plug
(Male)
AMP – 749925-3
Wire: Twisted-Pair Flat Cable or
Laminated Discrete Wire Cable
25 Pair 0.050 Centerline
28 AWG
Connector A: 68 Position Plug (Male)
AMP– 786090-7
Connector B: 50 Position Plug (Male)
AMP – 786090-7
Wire: Flat Ribbon or Twisted-Pair Flat
Cable 50 Conductor 0.025 Centerline
30 AWG
A-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Megaraid scsi 320-1

Table of Contents