Table of Contents
Specifi cations
24.4 in (620mm)
1.53 oz
(43.3 g)
Prefl ight Checklist
1. Charge fl ight battery.
2. Install fl ight battery in aircraft (once it has
been fully charged).
3. Bind aircraft to transmitter.
4. Make sure linkages move freely.
5. Perform Control Direction Test with
transmitter.
Wing Area:
82.0 sq in
(5.30 sq dm)
To register your product online, go to www.e-fl iterc.com
IC Information ......................................................12
Installed
Receiver : Receiver/ESC DSM2
DSMX
®
(PKZ3352)
Required to Complete
Battery: 150mAh 1S 3.7V 25C Li-Po
battery (EFLB1501S25)
Battery Charger : 1S Li-Po battery
charger.
Recommended Transmitter:
™
Spektrum
DSM2
with dual-rates (DX4e and up)
6. Set dual rates.
7. Adjust center of gravity.
8. Perform a radio system Range Check.
9. Find a safe and open area.
10. Plan fl ight for fl ying fi eld conditions.
11. Set fl ight timer for 45 minutes
EN
®
/
®
®
/DSMX
full range
3