Table of Contents
Advertisement
7-6
Power
Choose Power from the Phoenix BIOS Setup Utility main menu with the arrow
keys. You should see the following display. Power setting options are displayed
by highlighting the setting using the arrow keys and pressing <Enter>. All Power
BIOS settings are described in this section.
Main
Advanced
ACPI Mode:
Power Savings:
Standby Timeout:
Auto Suspend Timeout:
Resume On Time:
Resume Time:
Resume on Modem Ring:
↑↓
F1 Help
↔
Esc Exit
Select Menu
ACPI Mode
Use the setting to determine if you want to employ ACPI (Advanced
Configuration and Power Interface) power management on your system.
Power Savings
This setting sets the degree of power saving for the system. The options
are Disabled, Customized, Maximum Power Savings and Maximum
Performance. Customized allows you to alter the other two modes.
Security
[Enabled]
[Customized]
[Off]
[Off]
[Off]
[00:00:00]
[Off]
Select Item
-/+
Enter Select!Sub-Menu
Phoenix BIOS Setup Utility
Power
Boot
Change Values
7-15
Chapter 7: BIOS
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Advertisement
Table of Contents
