Table of Contents
Advertisement
7-5
Security
Choose Security from the Phoenix BIOS Setup Utility main menu with the arrow
keys.
You should see the following display.
displayed by highlighting the setting using the arrow keys and pressing <Enter>.
All Security BIOS settings are described in this section.
Main
Advanced
Supervisor Password Is:
User Password Is:
Quiet Boot
Set Supervisor Password
Set User Password
Password on Boot
Fixed Disk Boot Sector
↑↓
F1 Help
↔
Esc Exit
Select Menu
Supervisor Password Is:
This displays whether a supervisor password has been entered for the
system. Clear means such a password has not been used and Set means
a supervisor password has been entered for the system.
User Password Is:
This displays whether a user password has been entered for the system.
Clear means such a password has not been used and Set means a user
password has been entered for the system.
Security
Select Item
-/+
Enter Select!Sub-Menu
Security setting options are
Phoenix BIOS Setup Utility
Power
[Clear]
[Clear]
[Disabled]
[Enter]
[Enter]
[Disabled]
[Normal]
Change Values
7-13
Chapter 7: BIOS
Boot
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Advertisement
Table of Contents
