Firmware And Configuration File Prefix And Postfix; Managing Firmware And Configuration File Download - Grandstream Networks HT502 User Manual

Dual fxs port analog telephone adaptor
Hide thumbs Also See for HT502:
Table of Contents

Advertisement

"cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the MAC address of the device, i.e., "cfg000b820102ab". In
addition, device will also requests a XML configuration file "cfgxxxxxxxxxxxx.xml". If the download of
"cfgxxxxxxxxxxxx.xml" is not successful, the provision program will issue a request for a generic
configuration file "cfg.xml". Configuration file name should be in lower case letters.
For more details on Grandstream Device provisioning, please refer to:
http://www.grandstream.com/general/gs_provisioning_guide_public.pdf

FIRMWARE AND CONFIGURATION FILE PREFIX AND POSTFIX

Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and
Postfix. This makes it the possible to store ALL of the firmware with different version in one single
directory. Similarly, Config File Prefix and Postfix allows device to download the configuration file with the
matching Prefix and Postfix. Thus multiple configuration files for the same device can be stored in one
directory.
In addition, when the field "Check New Firmware only when F/W pre/suffix changes" is set to "Yes", the
device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

MANAGING FIRMWARE AND CONFIGURATION FILE DOWNLOAD

When "Automatic Upgrade" is set "Yes, every" the auto check will be done in the minute specified in this
field. If set to "daily at hour (0-23)", Service Provider can use P193 (Auto Check Interval) to have the
devices do a daily check at the hour set in this field with either Firmware Server or Config Server. If set to
"weekly on day (0-6)" the auto check will be done in the day specified in this field. This allows the device
periodically check if there are any new changes need to be taken on a scheduled time. By defining
different intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration
File download in minutes to reduce the Firmware or Provisioning Server load at any given time.
Automatic Upgrade:
No
Yes, every
Yes, daily at hour
FIRMWARE VERSION 1.0.8.4
10080
minutes(60-5256000).
1
(0-23).
Yes, weekly on day
HT502 USER MANUAL
1
(0-6).
Page 47 of 49

Advertisement

Table of Contents
loading

Table of Contents