Grandstream Networks HT502 User Manual page 32

Firmware Server Path
Config Server Path
XML Config File
Password
HTTP/HTTPS User
Name
HTTP/HTTPS
Password
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
Allow DHCP Option 66
to override server
Automatic Upgrade
Disable SIP NOTIFY
Authentication
Authenticate Conf File If set to Yes, config file is authenticated before acceptance.
Firmware Key
SIP TLS Certificate
SIP TLS Private Key
FIRMWARE VERSION 1.0.8.4
IP address or domain name of firmware server.
IP address or domain name of configuration server.
The password used for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML configuration file.
The user name needed to authenticate with the HTTP/HTTPS server.
The password needed to authenticate with the HTTP/HTTPS server.
Default is blank. If configured, HT502 will request firmware file with the prefix. This
setting is useful for ITSPs. End user should keep it blank.
Default is blank. End user should keep it blank.
Default is blank. End user should keep it blank.
Default is blank. End user should keep it blank.
If set to "Yes", configuration and upgrade server information can be obtained using DHCP
option 66 from DHCP server located in customer's environment.
Choose "Yes" to enable automatic upgrade and provisioning. If select "Check every
minutes" input the amount of minutes you want it to check for update. If select "Yes, daily
at hour" make sure to input the hour of the day you want it to check for update, e.g. for 11
pm type 23. If select "Yes, weekly on day" make sure you input the day of the week (in
format 0-6, 0 is Sunday) you want it to check for update. When set to No, HT502 will only
do the following option you select; "Always check for New Firmware at Boot up" will check
for new firmware every time the device reboots. "Check New Firmware only when F/W
pre/suffix changes" will check for updates only when the pre/suffix has been changed.
Device will not challenge NOTIFY with 401 when set to Yes.
configuration from an unauthorized change.
Used for firmware encryption. Should be 32 digit in hexadecimal representation. End
user should keep it blank.
The user specify SSL certificate used for SIP over TLS in X.509 format.
The user specify SSL private key used for SIP over TLS in X.509 format.
HT502 USER MANUAL
This protects the
Page 32 of 49