Navigate To Cursor Position On Map - Lowrance GlobalMap 3200 Operation Instructions Manual

Navigating to Man Overboard: Navigation Page, left, and Map Page,
right. The victim is astern of the vessel; the GPS shows which direc-
tion to steer to for the rescue.
The man overboard position is also stored in the waypoint list for future
reference. It can be edited the same as any other waypoint in Advanced
Mode. This prevents the inadvertent loss of the current Man Overboard
position.
To cancel navigation to MOB, press | |↓ to
MENU MENU C N
ANCEL AVI-
| |← to | . The GlobalMap 3200 stops showing naviga-
ENT Y ENT
GATION ES
tion information.

Navigate to Cursor Position on Map

The command: navigates to the current cursor position on
G T C
O O URSOR
the map. It's a quick and handy way to navigate to anything you can
see on the map display.
1. Use the cursor (controlled by the arrow keys) with the zoom in and
zoom out keys to maneuver around the map until you find a location
you want to go to.
2. Center the cursor over the location to select it. See the example in
the following figure. (Many map items such as waypoints, Points of In-
terest, towns, etc. can be "selected," and appear "highlighted" with a
pop-up box. Other features, such as a river or a street intersection will
not appear "highlighted," but the cursor will take you to those locations
just the same.)
41