Navigate Back To Mob Waypoint; Navigate To Cursor Position On Map - Lowrance LMS-522c iGPS Installation And Operation Instructions Manual

Of course, the first thing to do is remain calm and then use all standard
safety procedures to rescue the person.
This unit has a man overboard feature that shows navigation data to
the location where the feature was activated. To activate it, press the
and
ZOUT ZIN
keys are pressed is used as the man overboard position.
Caution:
Saving a new "Man Overboard" waypoint will overwrite the pre-
vious "Man Overboard" waypoint.

Navigate Back to MOB Waypoint

Find your way back to the accident position with the Navigation Page
or Map Page. When MOB is activated, the Navigation Page automati-
cally shows the compass rose with its bearing arrow pointing toward
the man overboard position, and the destination name says "Going To
Man Overboard." The Map Page displays a Man Overboard waypoint,
represented by a human figure, and the steering arrow points where to
steer to reach that position.
Navigating to Man Overboard: Man Overboard Activated message (left).
Navigation Page, center, Map Page (right). The victim is to the starboard
of the vessel. The GPS shows which direction to go for the rescue.
The man overboard position is also stored in the waypoint list for fu-
ture reference. It can be edited the same as any other waypoint. This
prevents the inadvertent loss of the current Man Overboard position.
To cancel navigation to MOB, press
| |← to
ENT
TION

Navigate to Cursor Position on Map

The
G T C
O O URSOR
the map. It's a quick and handy way to navigate to anything you can
see on the map display.
keys at the same time. Your position at the time these
| . The unit stops showing navigation information.
Y ENT
ES
command: navigates to the current cursor position on
|
MENU MENU
124
|↓ to
C
ANCEL
N
AVIGA-