Table of Contents
Advertisement
The last field in this menu is
GlobalMap 3200 to automatically adjust with the time change caused
by Daylight Saving Time (you should only have to set it once). You may
select which set of rules matches DST in your region, or simply accept
the default.
Once you have each field set the way you want, press
until you return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, a alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS re-
ceiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. If you want,
you have the option of turning off the WAAS Acquired/Lost alarm with-
out affecting how the GlobalMap 3200 uses WAAS. Here's how:
1. Press
MENU
2. With the option highlighted, press
check it (turn on.) After the option is set, press
the page display.
3. You can return to this command and press
ture on.
Software Version Information
From time to time, Lowrance updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.lowrance.com.
These upgrades make the unit perform better or introduce a new fea-
ture or function. You can find out what software version is running in
your GlobalMap 3200 by using the Software Information command.
System Setup command left; Software Information command, center.
|
|↓ to
MENU
GPS S
At right, the Software Information screen.
. This feature allows your
C
DST
ONFIG
|
|↓ to
ENT
ETUP
to uncheck it (turn off) and
ENT
ENT
90
repeatedly
EXIT
S
WAAS A
HOW
LARM
|
to return to
EXIT
EXIT
again to turn the fea-
.
Hide quick links:
Advertisement
Table of Contents
