Lowrance GlobalMap 3200 Operation Instructions Manual page 56

To transfer data from the MMC to the GlobalMap 3200: press →
to |
L ENT
OAD
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
|
S D ENT
AVE ATA
The GlobalMap 3200 will display first a progress then a completion
message when the data transfer is finished. To return to the Page view,
repeatedly press
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from the GlobalMap 3200's memory to an
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
tion box, use ↓ or ↑ to highlight the file, then press
selection. Next, press ↓ to
a completion message when the data transfer is finished. To return to
the Page view, press
.
S D
AVE
.
.
EXIT
L
|
EXIT EXIT
| . If you wish to rename the file (as
ENT
ATA
ENT
MMC.
| . The GlobalMap 3200 will display
ENT
OAD
| |
EXIT EXIT
50
to activate the selection box.
to activate the selec-
ENT
ENT
.
|↓ to
ENT
to accept the