Set Man Overboard (Mob) Waypoint; Navigate Back To Mob Waypoint; Navigate To Cursor Position On Map - Lowrance iFINDER H2O C Operation Instructions Manual

To cancel navigation, press
| . The iFINDER stops showing navigation information.
Y ENT
ES

Set Man Overboard (MOB) Waypoint

One of boating's most terrifying events is having a friend or family
member fall overboard. This unit has a man overboard feature that
shows navigation data to the location where the feature was activated.
To activate it, press the
tion at the time these keys are pressed is used as the man overboard
position.
Caution:
Saving a new Man Overboard waypoint will overwrite and erase
the previous Man Overboard waypoint.

Navigate Back to MOB Waypoint

Find your way back to the position with the Navigation Page or Map
Page. When MOB is activated, the Navigation Page automatically
shows the compass rose with its bearing arrow pointing toward the
man overboard position. The destination name says Going To Man
Overboard and the Map Page displays a Man Overboard waypoint, rep-
resented by a human figure. The steering arrow points where to steer
to reach that position.
The man overboard position is stored in the waypoint table for future
reference. It can be edited the same as any other waypoint in Advanced
Mode. This prevents the inadvertent loss of the current Man Overboard
position.
Tip:
You don't need to have an emergency to use the MOB waypoint. In
Easy Mode, it is the only way you can set an additional waypoint
other than the Home waypoint. When you set the MOB point, can-
cel navigation and use it like a regular waypoint. (Remember, you
can set 1,000 waypoints in Advanced Mode.)
To cancel navigation to MOB, press
| |← to
ENT
TION
formation.

Navigate to Cursor Position on Map

The
G T C
O O URSOR
the map. It's a quick and handy way to navigate to anything you can
see on the map display.
1. Use the cursor with the zoom in and zoom out keys to maneuver
around the map until you find a location you would like to visit.
ZOUT
| . The iFINDER stops showing navigation in-
Y ENT
ES
command navigates to the current cursor position on
|↓ to
MENU C
and keys at the same time. Your posi-
ZIN
MENU
33
N
ANCEL AVIGATION
|↓ to
C
| |← to
ENT
N
ANCEL AVIGA-