Update Trail Criteria (Auto, Time, Distance); Trail Update Rate (Time, Distance); Delete Trail - Lowrance GlobalMap 3200 Operation Instructions Manual

From the Trails Menu, press → to
highlighted, press

Update Trail Criteria (Auto, Time, Distance)

The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're travel-
ing in a straight line. Once you deviate from a straight line, the GlobalMap
3200 "drops" a plot point (trail waypoint) onto the trail. This conserves plot
trail points. If a plot trail uses all of the available points allotted to it, the
beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to
→ ←
Press or

Trail Update Rate (Time, Distance)

You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mi.
With one of the Update Criteria selected, use the cursor arrows to
highlight either the
. Press ↑ or ↓ to change the first character, then press → to
press
ENT
the next character and repeat until the entry is correct. Press
return to the Trail Options Menu.
Trail Options menu: Update Time Rate setting, left, and Update Dis-
Specific Trail Options

Delete Trail

To delete a specific trail: From the Trails Menu, press ↓
Name| . The Edit Trail menu appears as seen in the following fig-
ENT
ure. Press → to
to check it (turn on) and uncheck it (turn off.)
ENT
criteria type|
to select
U R
PDATE
tance setting, right.
|
D T
ELETE RAIL
|
O
PTIONS
O
PTIONS
ENT.
or
U D
ATE PDATE
|← to
ENT Y
ES
93
. With
ENT U
PDATE
| |↓ to
ENT
data entry boxes and
ISTANCE
| .
ENT
A T
CTIVE RAIL
U C
PDATE RITERIA
to
EXIT
to Trail
.