Carrying The Tool; Maintenance; Replacing Carbon Brushes - Makita 2414B Instruction Manual

Carrvina the tool
I
Fold'dohn the
tool
head
to
the position
where you can attach the chain t o the hook
on the handle.
MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes regu-
larly. Replace when they wear down to the
limit mark. Keep the carbon brushes clean
and free to slip in the holders. Both carbon
brushes should be replaced at the same time.
Use only identical carbon brushes.
I L
Limit
mark
Use a screwdriver to remove the brush holder
caps. Take out the worn carbon brushes,
insert the new ones and secure the brush
holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjust-
ment should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
11