Alignment And Adjustments Vcr Adjustment; Reference; Alignment And Adjustments 6-1 Vcr Adjustment - Sony SLV-D990P R Service Manual

QQ
3 7 63 1515 0
6. ALIGNMENT AND ADJUSTMENTS
6-1 VCR ADJUSTMENT

6-1-1 Reference

1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Main PCB Micom (IC601) and NVRAM (IC605: EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Press the "TEST" botton on VCR MAIN PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.
6-1-1(a) Location of adjustment button of remote control
TE
L 13942296513
SLV-D990P
www
.
http://www.xiaoyu163.com
X-Point (Tracking Center) Adjustment ;
NVRAM Option Setting ;
Head Switching Adjustment ;
x ao u163
y
i
http://www.xiaoyu163.com
SLV-D990P B/D990P E/D990P R/D995P E
2 9
8
Q Q
3 6 7 1 3 1 5
Fig. 6-1
co
.
6-1
9 4 2 8
0 5 8 2 9 9 4 2 8
SLV-D995P
m
9 9
9 9