6. VCR Alignment and Adjustments
6-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" can be adjusted with remote control.
2) When replacing the VCR Main PCB Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjustment.
- Press the "TEST" botton on Main PCB/Function PCB to set the adjustment mode.
-. If the corresponding adjustment botton is pressed, the adjustment is performed automatically
-. If the adjustment is completed. be sure to turn the power off
6-1-1 Location of adjustment button of remote control
X-Point (Tracking Center)
Adjustment ; "5"
Head Switching
Adjustment ; "SP/LP"
Fig. 6-1
6-1
SLV-D900E/D900G