Start At/Finish At - Miele SUPERTRONIC Operating Instructions Manual

Start at/Finish at

You can set the required starting time and the required
finishing time.
Times can be set in 15-minute increments. The start or end of
a programme can be delayed by up to 24 hours. The time will
be adjusted to the next quarter of an hour from the first 15-
minute step.
^ Select the Start at or Finish at option in the menu.
Cottons
\
$ Stains
\
# Start at
\
! Finish at
^ Use
+ -
and to select the required Start at or Finish at
times. Confirm the times you have set with
The end of the programme (Finish at) will change if
temperature, spin speed, selected Extras and/or Stains are
modified after the selection of the programme.
Additionally, the actual load size can only be determined
accurately by the machine once the programme has started.
The programme end time may, therefore, be a bit later or
earlier than first indicated.
2. Select a programme
1-8 kg 1:49 h.
14:00
15:43
[
10:21
+ $
[
- #
[
OK !
OK
.
31