The Following Fault Message Appears In The Display At The End Of A Programme - Miele SUPERTRONIC Operating Instructions Manual

Problem solving guide
The following fault message appears in the display at the end
of a programme
Fault message
Fault F 139 /
dispenser
Fault F 140 /
dispenser
Check detergent
Hygiene information
62
Possible cause
The automatic detergent
dispensing unit is faulty.
Excessive foam has built
up during washing.
A programme of at least
60°C has not been run for
a long period of time.
Remedy
– Call Miele.
– Withdraw the dispenser unit's
plug from the washing
machine.
– The machine can continue to
be operated without the
detergent dispensing unit.
Check:
– the amount of detergent
used.
– the basic dosage quantity
when using automatic
detergent dispensing.
– Adjust the dosage according
to the manufacturer's
instructions on the
packaging and the degree of
soiling of the laundry.
Run the Cottons 75°C
programme with a universal
detergent to prevent the
formation of organic deposits
and unpleasant odours in the
machine.