Adding Or Removing Laundry After A Programme Has Started - Miele SUPERTRONIC Operating Instructions Manual

5. Starting a programme
Change

Adding or removing laundry after a programme has started

38
in the first five minutes
– Temperature
– Selecting and deselecting Extras Short, Water plus, Extra
quiet and Extra rinse
up until the final spin
– Spin speed
– Selecting and deselecting Rinse hold
Touch the Change sensor and alter the required setting.
^ Press the / button to open the drum door.
^ Add or remove items.
^ Close the drum door.
The programme will continue automatically.
Please note:
Once a programme has started, the machine cannot recog-
nise any adjustment to the load.
For this reason, if laundry is added or removed after the start
of a programme, the machine will always complete the
programme cycle assuming a full load.
This can increase the programme running time shown in the
display.
The door cannot be opened if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– the programme has reached the Spin stage.
If you press the / button when the above conditions are
present, the following will appear in the display:
/ Door locked