M.2 Solid-State Drive - HP ProDesk 400 G1 Maintenance And Service Manual

M.2 solid-state drive

Description
128 GB solid-state drive (SSD), M.2
The M.2 SSD is secured with one slotted Torx screw. It is located under the heat sink and fan.
To remove the M.2 SSD:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the hard drive
4. Remove the drive cage
5. Remove the heat sink
6. Remove the fan
7. Remove the Torx screw that secures the module to the computer.
(Preparation for disassembly on page
(Access panel on page
(Hard drive on page
(Drive cage on page
(Heat sink on page
(Fan on page 36).
18).
19).
37).
33).
17).
M.2 solid-state drive 41