Front Bezel - HP ProDesk 400 G1 Maintenance And Service Manual

Front bezel

The front bezel is secured to the access panel by tabs.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Position the access panel upside-down so you can access the inside of the bezel.
4. Pull down to loose the bottom, interior on the bezel (1).
5. Disengage the tabs on the top, interior of the bezel (2).
6. Remove the bezel from the access panel.
To install the front bezel, reverse the removal procedure.
(Preparation for disassembly on page
(Access panel on page 18).
17).
Front bezel 25