Table of Contents
Advertisement
Recording
Three recording modes are available on the system: Manual Recording, Schedule Recording,
and Motion Recording.
NOTE: An SD card must be inserted in the wireless receiver in order to record. You should always
format the SD card prior to initial recording. For details, see "Format" on page 45.
NOTE: The system can record video to an SD card
NOTE: Recording overrides other actions on the receiver. You must stop recording on the system
in order to perform other actions, such as opening the Main Menu, Quad Mode, etc.
Recording Mode Summary
Mode
Description
• Continuous recording from one camera
•
Press the Record—
the receiver to start/stop manual recording
MANUAL
•
RECORDING
Cannot record while in Quad mode
•
Cannot record while in Auto Sequence Viewing Mode
• Continuous recording from one camera or from Auto Sequence Viewing Mode
(system will record from one camera at a time)
• ATTENTION: Turn off Manual Recording and Motion Recording to enable Schedule
SCHEDULE
Recording
RECORDING
• Enter a Start and Stop Time from Main Menu>Record>Schedule Record
• Cannot enable Schedule Recording while in Quad Mode
• System only records when motion is detected by a camera
• Compatible with Quad Mode (recommended)
MOTION
• Compatible with Auto Sequence Viewing Mode
RECORDING
• Press the Motion button on the remote control or the RECORD—A button on the
(AUTO)
receiver to start/stop Motion Recording
For more details on each recording mode, see "Manual Recording" starting on page 22.
one channel at a time
button on the remote control or the RECORD—M button on
Recording
.
21
Advertisement
Table of Contents
