Recording; Format Memory - Lorex LW2750 Series User Manual

10

Recording

The following recording modes are available on the system: manual recording, schedule
recording, and motion recording. The system records video to the included SD card. Re-
cord up to 4 channels at the same time.
Recording Prerequisites:
• An SD card must be inserted into the receiver in order to record video. You should al-
ways format the SD card prior to initial recording. For details, see 10.1 Format Memory,
page 20.
Maximum Recording Times:
The system supports SD cards up to 64 GB. Use the table below to help you estimate the
recording times on various sizes of SD cards. Times shown are in hours and minutes.
SD Card Capacity Single Channel Recording @ QVGA
Resolution
7 hours
1 GB
2 GB 14 hours
4 GB 27 hours
8 GB 54 hours
108 hours
16 GB
32 GB 216 hours
64 GB 432 hours
Note
The system supports SD High Capacity (SDHC) cards, minimum Class 2, up to 64GB. The following
brands of SD cards are confirmed by Lorex: Adata, Kingston, Patriot, Sandisk, and Toshiba.
Recording Mode Summary:
Mode
Scheduled Recording
Manual Recording
Motion Recording

10.1 Format Memory

It is highly recommended to format the SD card prior to initial recording.
#LX400011; r. 1.0/11916/13451; en-US
Single Channel Recording @ VGA
Resolution
6.5 hours
13 hours
26 hours
52 hours
104 hours
208 hours
416 hours
Description
• Continuous or motion event
recording from up to four
cameras according to a
weekly schedule.
• Continuous recording from
up to 4 cameras at a time.
• System only records when
motion is detected by a cam-
era(s).
How to Operate
• Enter a start and stop time
for each day from > Re-
cord >
Schedule Recording.
• Press on the top pan-
el of the receiver to start /
stop manual recording.
• Press on the top pan-
el of the receiver to start /
stop manual recording.
20