Appendix #3 - Connection To A Lorex Time Lapse Vcr For Alarm Recording - Lorex SGQ4160 Instruction Manual

APPENDIX #3 – CONNECTION to a LOREX
TIME LAPSE VCR FOR ALARM RECORDING
Wires being run from the Time Lapse VCR's or DVR's alarm input terminal must be soldered to the
appropriate terminal of the 9 Pin Alarm Connector.
In addition to connecting up to 4 PIR Motion Sensors, connect the 9 Pin Alarm Connector to a security recorder
such as the Lorex Time Lapse VCR shown below for Alarm Recording upon motion detection.
For descriptions of each contact on the 9 Pin Connector of the Quad Processor, please refer to Appendix #4.
4 5
VCR MONITOR
IN OUT
12
QUAD ALARM
OUT