Table of Contents
Advertisement
Recording
To enable schedule recording:
1. Disable ALL RECORDING on the system:
• If the system is in Manual Recording, press the Record—
RECORD—M button on the wireless receiver so the blue LED
receiver
• If the system is in Motion Recording, press the RECORD—A/Motion button so the blue LED
NOT appear
on the wireless receiver
ATTENTION: Manual Recording, Motion Recording, and Quad Mode will override
Schedule Recording. If you wish to use Schedule Recording, you must ensure Manual
Recording, Motion Recording, and Quad Mode are disabled.
2. Select a channel (1~4) on the wireless receiver or from the remote control
OR
Press the CHANNEL—A button to enable Auto Sequence Viewing Mode.
When the Start Time arrives, recording begins. The "REC" indicator appears on-screen.
NOTE: You cannot use Quad Mode with Schedule Recording.
Figure 7.2 Schedule Recording on the receiver – no blue LEDs should be lit up beneath Manual Recording (M) and
Motion Recording (A)
Stopping Schedule Recording
When the Stop Time arrives, the system stops recording. However, if necessary, you can also
stop Schedule Recording manually.
To stop Schedule Recording:
Press Record—
wireless receiver to stop schedule recording
NOTE: If you stop Schedule Recording, you cannot resume Schedule Recording. You will need to
enter new Start and Stop times in the Schedule Record menu.
When Should I Use Schedule Recording?
•
It is recommended to use Schedule Recording for capturing a sensitive or important
target that needs to be recorded
docks, etc.
•
During the day in high traffic environments
24
button on the remote control or the RECORD—M button on the
daily
, i.e. a cash register, safe, shipping & receiving
button on the remote control or the
does NOT appear
on the wireless
does
Advertisement
Table of Contents
