Appendix - E Connecting To A Lorex Dvr For Normal Recording - Lorex SY14S1044C-A Instruction Manual

APPENDIX - E
CONNECTING TO A
NOTE
:
When recording to a Digital Video Recorder, the DVR may indicate a Video Loss as the monitor
sequences between channels. This Video Loss occurs because the monitor's switching function is
analogue, whereas the DVR is a digital product. Therefore a synchronization problem will result.
The Solution to this problem is to adjust the Video Loss alarm sensitivity setting to 3 frames on your DVR
unit, or simply disable the video loss function on your DVR. Please contact the manufacturer of your DVR
if you require further assistance.
LOREX DVR
DVR – Back Panel
FOR NORMAL RECORDING
-19-