Table of Contents
Advertisement
Recording
Manual Recording
Manual Recording allows you to manually start/stop recording from
cannot record while in Quad mode.
You can also record while in Zoom mode. For details on using Zoom, see "Zoom" on page 43.
NOTE: You cannot change channels or enable Auto Sequence Viewing Mode during Manual
Recording.
R
E
R
E
160602-1.AVI
Figure 7.0 Recording indicated by the OSD
To enable Manual Recording:
1. Select a channel (1~4) on the wireless receiver or from the remote control.
2. Press the Record—
receiver. A blue LED will light up under RECORD—M on the wireless receiver.
3. To stop Manual Recording, press the Record—
RECORD—M button on the wireless receiver again.
When Should I Use Manual Recording?
•
Emergency recording
•
Low traffic environments
22
C
C
button on the remote control or RECORD—M button on the wireless
C
a
m
1
C
a
m
1
2009 07 17
16:32:05
button on the remote control or
one channel at a time
. You
Advertisement
Table of Contents
