Quick Start; Basic Setup - Cradlepoint COR IBR350 Manual

• No Light = Not receiving power. Check the power switch and the power source connection.
• Flashing Amber = Attention. Open the administration pages (see Accessing the Administration Pages) and check the router status.
LAN - LAN
• Green = LAN is connected.
• Off = LAN is not connected.
– INTEGRATED MODEM
Indicates the status of integrated modems.
Both integrated and external USB modems have the following LED indicators:
• Green = Modem has established an active connection.
• Blinking Green = Modem is connecting.
• Amber = Modem is not active.
• Blinking Amber = Data connection error. No modem connection possible.
• Blinking Red = Modem is in the process of resetting.
– SIGNAL STRENGTH
Blue LED bars indicate the active modem's signal strength.
• 4 Solid Bars = Strongest signal.
• 1 Blinking Bar = Weakest signal. (A blinking bar indicates half of a bar.)
ADDITIONAL LED INDICATIONS
• The USB and modem lights turn amber and blink twice to signal factory reset.
• Two of the modem LEDs blink red in unison for 10 seconds when there is an error during firmware upgrade.
Quick Start
•

Basic Setup

• Accessing the Administration Pages
• First Time Setup Wizard
• Using Enterprise Cloud Manager
Basic Setup
8