Cradlepoint COR IBR350 Manual page 120

• Enable SSH Server – When the router's SSH server is enabled you may access the router's command line interface (CLI) using the standards-
based SSH protocol. Use the username "admin" and the standard system password to log in.
• SSH Server Port – Default: 22.
Remote Management
Remote Management allows a user to enable incoming WAN pings or change settings for the router from the Internet using the router's Internet
address.
Allow WAN pings – When enabled the functionality allows an external WAN client to ping the router.
Allow Remote Web Administration – When remote administration is enabled it allows access to these administration web pages from the Internet.
With it disabled, you must be a client on the local network to access the administration website. For security, remote access is usually done via a
non-standard http port. Additionally, encrypted connections can be required for an added level of security.
• Require HTTPS Connection – Requiring a secure (https) connection is recommended.
• HTTP Port: Default – 8080. This option is disabled if you select "Require Secure Connection".
• Secure HTTPS Port – Default: 8443.
NOTE: You can restrict remote access to only specified IP addresses in Network Settings > Firewall under Remote Administration Access Control.
Allow Remote SSH Access – This will enable SSH access to the router from the Internet. It is only available when SSH access is enabled in the
Local Management tab.
Some carriers block the remote SSH access ports. If a ping to the router's WAN port does not work, it is unlikely that remote SSH access will work.
GPS
If you have an attached device with GPS support, you can enable a graphical view of your router's location, which appears in Status > GPS. You
can also enable GPS NMEA format sentence reporting (or TAIP for the COR IBR1100/IBR1150) to a server (LAN, WAN, or remote). This GPS
reporting functionality requires a separate software client to listen/query for these sentences.
SIM-based models with GPS support require that the SIM be inserted. Some carriers disable GPS support in otherwise supported modems. If you
encounter issues with obtaining a fix, contact your carrier and ensure that GPS is supported.
Some of the following GPS options are specific to Cradlepoint COR devices, particularly the COR IBR1100 Series.
Figure 150: Remote Management Settings
120