Local
Network
Interfaces
Each LAN type – Ethernet and VLAN – has a separate section with configuration options. Unless the default configuration is sufficient, YOU MUST
CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options for a network. You can then select these interfaces
to add to a network in the Local
Network
Editor (see above).
Select from the following tabs:
• Ethernet
Port
Configuration
• VLAN Interfaces
Ethernet
Port
Configuration Ethernet Port Configuration provides the ability to control: Enabled
or
Disabled and Link
Speed.
Figure 86: Wired 802.1x Authentication Settings
Figure 87: Local Network Interfaces
68