• First – Use the first IPv6 prefix found
• Static – Always use a static IPv6 translation (input the prefix here)
Transitioning from short prefix to a longer prefix (such as from /48 to /64) is not without problems, as some of the LANs may lose IPv6 connectivity.
DMZ (DeMilitarized
Zone)
A DMZ host is effectively not firewalled in the sense that any computer on the Internet may attempt to remotely access network services at the
DMZ IP address. Typical uses involve running a public Web server or sharing files.
Input the IP Address of a single device in your network to create a DeMilitarized Zone for that device. To ensure that the IP address of the selected
device remains consistent, go to the "Reservations" section under Network
Settings
>
DHCP Server and reserve the IP address for the device.
Use
caution
when
enabling
the
DMZ feature, as
it
can
threaten
the
security
of
your
network. Only
use
DMZ as
a
last
resort.
Remote
Admin. Access
Enable
Remote
Administration
Access
Control: Selecting this option allows you to make remote administration tools available to only the
specified IP addresses. Access from all other IP addresses will be blocked. This option only filters IP addresses: you must enable Remote
Management separately (System
Settings
>
Administration).
The services affected by this include remote HTTP, HTTPS, SNMP, and SSH configuration tools. This does not impact LAN-based administration,
i.e., devices within your network still have administration access. The individual remote administration services can be enabled under System
Settings
>
Administration: select the Remote
Management tab.
Figure 60: Network Prefix Translation
Figure 61: Network DMZ
45