Using Enterprise Cloud Manager; Navigating The Administration Pages - Cradlepoint COR IBR350 Manual

• Administrator Password
• Time Zone
• Access Point Name (APN)
• Modem Authentication
• Failure Check
NOTE: To return to the First Time Setup Wizard after your initial login, select GETTING STARTED on the top navigation bar and FIRST TIME SETUP
in the dropdown menu.
Using Enterprise Cloud Manager
Rapidly deploy and dynamically manage networks at geographically distributed stores and branch locations with
point's next generation management and application platform. Enterprise Cloud Manager (ECM) integrates cloud management with your Cradle-
point devices to improve productivity, increase reliability, reduce costs, and enhance the intelligence of your network and business operations.
Click here to sign up for a free 30-day ECM trial.
Depending on your ordering process, your devices may have already been bulk-loaded into ECM. If so, simply log in at cradlepointecm.com using
your ECM credentials and begin managing your devices seamlessly from the cloud.
If your device has not yet been loaded into your ECM account, you need to register. Log into the device administration pages and go to Getting
Started > Enterprise Cloud Manager Registration. Enter your ECM username and password, and click on "Register".
Once you have registered your device, go to cradlepointecm.com and log in using your ECM credentials.
For more information about how to use Cradlepoint Enterprise Cloud Manager, see the following:
• Getting Started
• ECM on the Knowledge Base
Navigating the Administration Pages
To access the administration pages, open a web browser and type the hostname "cp/" or IP address "http://192.168.0.1" into the address bar. The
Administrator Login page appears.
NOTE: The hostname and IP address are editable; "cp" and "192.168.0.1" are the defaults. If you have changed these, input your customized
hostname or IP address into the web browser to access the administration pages.
Log in using your administrator password. Initially, this password can be found on the bottom of the router as the Default Password (this password
is also the last eight digits of the unit's MAC address). You may have changed the administrator password during initial setup using the First Time
Setup Wizard. If so, log in using your personalized administrator password.
If you have forgotten your personalized password, you can reset the device to the factory default configuration. When you reset the router, the
administrator password will revert back to the Default Password. Press and hold the RESET button on the router unit until the lights flash
(approximately 10-15 seconds). The reset button is recessed, so it requires a pointed object such as a paper clip. You can then log in using the
Default Password.
11
Enterprise Cloud Manager, Cradle-