Cradlepoint COR IBR350 Manual page 50

GRE
Config Name
is
office_tunnel
The third field defaults to "is," but you can also select "is not," "starts with," "contains," or "ends with" to define the zone.
WAN Interfaces Attaching WAN interfaces to a zone includes many more options. Select "WAN" in the first field, and then select from each of
the following fields to create a statement that defines which WAN interfaces to attach to this zone.
Field 2: Choose one of the following:
• Port – Select by the physical port on the router (e.g., "Modem 1").
• Manufacturer – Select by the modem manufacturer (e.g., "Cradlepoint Inc.").
• Model – Select according to the specific model of modem.
• Type – Select by type of Internet source (Ethernet, LTE, Modem, Wireless as WAN, WiMAX).
• Serial Number – Select a 3G or LTE modem by the serial number.
• MAC Address – Select from a dropdown list of attached devices.
• Unique ID – Select by ID. This is generated by the router and displayed when the device is connected to the router.
Field 3: Select "is," "is not," "starts with," "contains," or "ends with" to create your condition.
Field 4: If the desired values are available, select from the dropdown list. You may need to manually input the value.
Figure 68: Network Zone Example
50