First Time Setup - Cradlepoint COR IBR350 Manual

• Getting Started
• ECM on the Knowledge Base
First Time Setup
When you log in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD, which will walk you through basic steps
to customize your router. To return to the First Time Setup Wizard after your initial login, go to Getting Started > First Time Setup in the dropdown
menu. You have the ability to configure any of the following:
• Administrator Password
• Time Zone
• Access Point Name (APN) for SIM-based modems
• Modem Authentication
• Failure Check
Administrator Password
Cradlepoint recommends that you change the router's ADMINISTRATOR PASSWORD, which is used to log into the administration pages. The
administrator password is separate from the WiFi security password, although initially the Default Password is used for both.
NOTE: If you plan to use your router in a PCI DSS compliant environment, do not use this setting. Use the "Advanced Security Mode" settings
under the Router Security tab in System Settings > Administration instead.
Time Zone
You can select your TIME ZONE from a dropdown list. (This may be necessary to properly show time in your router log, but typically your router
will automatically determine your time zone through your browser.)
Click NEXT.
Figure 20: COR IBR350 Administrator Login Page
19